MEPAP-Multisource Electricity Producer with Air Purifier

MEPAP is a device that uses multiple sources for electricity generation such as vibration, EM radiation, thermal, solar, wind and helps us come out of dependence on fossils for energy.

MEPAP-Multisource Electricity Generator Integrated with Air Purifier which is built with the motto of "Prevent Shortage by Utilizing Wastage" is a device that uses multiple sources for electricity generation such as vibration, electromagnetic radiation, thermal, solar, winds which are renewable sources and help us come out of our dependence on fossil fuels for electrical energy and MEPAP's Air Purifier purifies from the source like vehicle exhausts, factory chimneys, etc.., and harvest energy from the stray smoke too.

MEPAP ELECTRICITY GENERATOR GENERATES ELECTRICITY WITH THE HELP OF VIBRATION (Piezoelectric Materials like Quartz crystal, PFIG, and magnets) AND ELECTROMAGNETIC RADIATION (with the help of MetaMaterials using Full absorption concept, MoS2 monolayer sheet, and Transducers) ELECTROMAGNETIC induction [inductive coupling (power density is proportional to d, q, 1/d^3)], wind energy (from purifier where the mini turbine is connected with the governor, shafts and magnets), solar (using CdTe Photovoltaic cell) AND ALSO THERMOELECTRIC ENERGY using Seebeck effect of thermoelements and metallic strips (power density25μW/cm^2). MEPAP's Air Purifier uses Active shield, Active Carbon Filter, ICC (Improved Catalytic Converter), Honeycomb Active Carbon Filter, HEPA (High-Efficiency Particulate Air Filter) Type Filter, Anion Generator, Air pollution sensors.

Prototype Design:

Photos of MEPAP:

I was from a lower-middle-class family. We suffered many months without electricity and our area is prone to traffic so our area is filled with smoke and dust. Many were suffering from several respiratory disorders due to this dust and smoke. These made me think of inventing a low-cost electricity generator integrated with an air purifier.

The fundamental driver of my research was the growing demand for electrical energy and rising air pollution around the world. Today, we get more than 80% of our energy from burning fossil fuels, which is both detrimental to the environment and unsustainable. My idea will contribute to the solution of the energy problem by combining the efficiency of electromagnetic energy gathering systems, vibration energy harvesting systems, wind energy harvesting systems, thermal energy harvesting systems, and air purification systems into a single project.

My MEPAP solves 9 main problems in Earth
1. Fossil Depletion
2. Energy Crisis
3. Air Pollution
4. Global Warming
5. Acid Rain
6. Climate Change
7. Energy Wastage
8. Search for Alternate fuel
9. Search for Alternate energy

Common people for pollution control and to use harvested energy for domestic uses, EV industries to make a self-powered EV, and other Factories to control air pollution are the intended user of MEPAP. MEPAP is effective in reducing Acrolein, CO2, CO, NOX, Hydrocarbons, Ammonia, Chloroform, Xylenes, and other pollutants. MEPAP Energy Harvester device abruptly reduces the dependence on fossil fuels on energy by producing electricity via available sources such as Vibration, Heat, and Electromagnetic Radiation and so on.., The main objective of my idea is to produce self-powered vehicles –EV using my MEPAP and to create a pollution-free society. My device abruptly reduces the dependence on fossil fuels on energy by producing electricity via available sources such as Vibration, Heat, and Electromagnetic Radiation, and so on.., and it also aims to reduce air pollution from the source itself.

Below are some research results demonstrated by MEPAP:

Air Purification Research Results:

RESEARCH TEST ON PIEZOELECTRIC MATERIAL AND ENERGY FROM VIBRATION:

RESEARCH TEST ON ENERGY HARVESTING FROM EM RADIATION, METAMATERIALS AND RECTENNA:

Comparison of power-harvesting antenna:

The efficiency and power of a TEG remarkably depends on the temperature. Given figure shows the temperature of inlet and outlet when the engine is operated between 2500 rpm to 3400 rpm. As the engine speed increases, the temperature difference between the surfaces of TEM increases rapidly, hence the output power also increases.

It was found that there is a possibility of generating 1.4 kW of electricity form the heat recovery system in the exhaust of the car if the power produced by the engine is 150 kW and also found that it is possible to produce electricity of 5.9 MW by a waste heat energy recovery system of 500 MW of gas turbine power plant.
 At the speed of 80 km/hr, the power output with 72 mm * 4 mm TEM was 75 W.

PRESENTATION LINK:   https://docs.google.com/presen...

My MEPAP has undergone various tests and showed its efficiency through its results. Currently, I am implementing my MEPAP for domestic use in my neighbourhood to control air pollution as well as to harvest energy from stray fields through my CURED369 Program (www.cured369.com).

Energy Harvesting Technology to harvest energy from various sources.

Hybrid Storage System to store energy from various sources

FUTURE PLAN FOR AIR PURIFIER PART
Carbon Separator and Collector:
 Carbon dioxide is considered a major reason for global warming. Yet, it also holds great promise as a fuel of the future.
 The splitter has an atomic layer of tin in order to trap the energy that would be lost if copper is utilized as an electrode. It also has a thin membrane between the cathode and anode to improve the reaction.
 The splitter can open windows to solving the problem of storing energy from renewable sources by turning it straight into liquid fuel. It has a lot of potential as a future fuel.
Copper and tin are used to make the carbon dioxide splitter. The splitter features an atomic layer of tin to trap energy that would otherwise be lost if copper were used as an electrode. To improve the reaction, it also contains a thin membrane between the cathode and anode. The splitter has the potential to solve the difficulty of storing renewable energy by converting it directly into liquid fuel.
Splitting is a carbon-neutral and efficient procedure. It is already a well-known method of creating fuel that does not
increase carbon dioxide levels in the atmosphere. CO2 is broken down into two components: oxygen and carbon monoxide. Synthetic carbon-based fuel can be made by combining carbon monoxide with hydrogen. CO2 is removed from the atmosphere and not reintroduced, resulting in clean fuel.

I plan to serve more than 100 people and more than 2 industries through my MEPAP by deploying MEPAP for domestic and Industrial use.

MEPAP device manufacturing startup CURED369 aims at providing MEPAP to the people for the sake of reducing pollution with the motive “GO GREEN “And “Prevent Shortage by Utilizing the Wastage”. (i.e., Preventing the shortage of fossil fuels and other non-renewable resources by utilizing wasted energy sources such as vibration, waste heat, exhaust air etc.., for electricity generation, for air purification etc..,)

The main objective of my idea is to produce self-powered vehicles and devices using my MEPAP and to create a pollution-free society. 

By measuring the air pollution level and Energy Consumption level and implementing MEPAP in the areas where there is a need and then measuring the difference after its implementation. By doing it at a small scale We succeeded by controlling air pollution up to 89% and reducing the traditional energy consumption by people up to 72%. Now we plan to deploy MEPAP at a large scale for creating a positive impact in our society.

Material support especially for Metasurfaces is the major barrier.

All in our team are specialized innovators who work in different parts and mechanisms improving them for our future world.

My MEPAP had won IIT's Young Scientist Award and Hackcellence Fest Award by Toshiba and currently partnering with IITM for research and deployment purposes.

-

My device is completely innovative and will be a perfect solution for the growing problems and helps UN's SDGs to save our world from pollution, climate change and other crisis.